CFC Hot-Zone Insulation Protection
CFC Hot-Zone Insulation Protection
IC50 is semi-flexible composite material ideally suited for Hot-zone insulation protection. It is specially designed for the protection of insulation and furnace lining.
The semi-flexiable and allow a certain degree of bending. Primarily designed for high-temperature furnaces that require insulation protection and heat-shields. IC50 can be used as a direct replacement to other CFC Hot-Zone Insulation protection products.
Derived from PC70, IC50 retains some of the features from our flag-ship product. It is lightweight, offers good strength, and lower costs with the guaranteed Neftec quality. And even though it is specifically designed for insulation protection it offers enough diversity to be used in other applications. You are not just limited CFC Hot-zone Insulation.
IC50 comes in a standard 1500 x 1000 size which thicknesses ranging from 0.6-0.8 up to 5mm. To find out more and to request samples please contact us.
Material Grade |
IC50 |
|||
| Bulk Density | g/cm3 | 1.5 | ||
| Flexural Strength | MPa | 100 | ||
| Inter-laminar Shear Strength (ILSS) | MPa | 10 | ||
| Compressive Strength | MPa | 100 | ||
| Young’s Modulus | GPa | 55 | ||
| Tensile Strength | MPa | 100 | ||
| ( RT-1300C ) | ∥ | 10-6/C | 1.1 | |
| Coefficient of Thermal Expansion | ⊥ | 10-6/C | 19 | |
| Thermal Conductivity | ∥ | W/m・K | 32 | |
| ⊥ | 10 | |||
| Specific Heat | 20C | J/Kg・K | TBA | |
| Electrical Resistivity | μΩcm | NA | ||
| Charpy Impact Strength | KJ/m2 | TBA | ||
| Temperature Rating | Celcius | 2000°c | ||